9
EN
2
Select a language, then press
MENU/OK
to confirm.
»
The setting is saved.
Set the date and time
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[Date & time]
,
then press
MENU/OK
to confirm.
3
Press the numeric buttons to enter the
date, then press
MENU/OK
to confirm.
»
The time setting menu is displayed on
the handset.
4
Press the numeric buttons to enter the
time.
•
If the time is in 12-hour format, press
/ to select
[am]
or
[pm]
(Country
dependent).
5
Press
MENU/OK
to confirm.
Change the remote access
PIN (for D215)
Note
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Press
/ or
MENU/OK
>
[Answ.
Machine]
.
2
Select
[Remote access]
>
[Change PIN]
,
then press
MENU/OK
to confirm.
3
Enter the old PIN, then press
MENU/OK
to confirm.
4
Enter the new PIN code, then press
MENU/OK
to confirm.
5
Enter the new PIN code again, then press
MENU/OK
to confirm.
»
The setting is saved.
Charge the handset
Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear a
docking sound.
»
The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the
base station, the bars indicate the
battery level (full, medium and
low).
When the handset is on the base
station/charger, the bars flash until
charging is complete.
The empty battery icon flashes.
The battery is low and needs
recharging.
