background image

Domestic Appliances and Personal Care

HQ 561/A

CoolSkin

Rechargeable shaver

Published by Philips Domestic Appliances and Personal Care     Printed in The Netherlands      Copyright reserved     Subject to modification

©

99/03

4822 729 22127

PCS 99 998

GENERAL

-  Cool skin is a new shaving system.
   The shaver features a special compartment for 

cartridges containing Nivea for Men  moisturising 
shaving emulsion.

   This emulsion is applied to the skin while shaving.
- The shaving unit can be cleaned under a running hot 

tap.

   The HQ156 shaving heads are made of special
   stainless steel for corrosion-free cleaning with water.

TECHNICAL DATA

Input voltage 

:  100-240 V, 50/60Hz

Motor voltage     

:  1.2 V

Cell             

:  1x 4/5A NiCd

Cell capacity  

:  approx. 1200 mAH

Charging indicators  :  1x LED green
Charging time     

:  approx. 8 hours

Charging current  

:  200 mA cont.

Charging device   

:  Transformer in plug

                    

out : approx. 5V 

Comfort control   

:  fixed setting

                    

   contour following

Shaving heads     

:  HQ156 - 4822 690 10152

Shaving emulsion   :  HQ150 - 4822 390 10156 W-EU

MSH Coding
8851 561 00000 HQ 561

Beiersdorf,                         and Nivea for Men 
are registered trademarks of Beiersdorf AG.

Service

Service

Service

!

Service

Information

Содержание CoolSkin HQ 561

Страница 1: ...be cleaned under a running hot tap The HQ156 shaving heads are made of special stainless steel for corrosion free cleaning with water TECHNICAL DATA Input voltage 100 240 V 50 60Hz Motor voltage 1 2 V Cell 1x 4 5A NiCd Cell capacity approx 1200 mAH Charging indicators 1x LED green Charging time approx 8 hours Charging current 200 mA cont Charging device Transformer in plug out approx 5V Comfort co...

Страница 2: ...ngle part to guarantee optimal sealing of the gear shafts When reassembling the shaver the sealing ring item 2 must be placed onto the housing A new sealing ring must be used to ensure a proper sealing of the shaver To guarantee that the shaver is completely watertight only the original screws may be used CIRCUIT DESCRIPTION The working of the power supply can be diagrammatically represented in th...

Страница 3: ...ses high voltage peaks during shaving Normally this diode is placed between the motor solder tags to suppress radio interference RIF in the mains as well As TS5 makes it impossible to switch the motor on when the shaver is connected to the mains D7 is now placed on the PCB GENERAL Some resistors are not indicated in the electrical diagram These are resistors of 0 which serve as jumpers across prin...

Страница 4: ...eel unit 11 4822 522 10748 pinion 12 4822 361 21752 motor 1 2V 13 4822 492 63165 motor clamp 14 4822 442 01692 cover PH 4822 442 01708 cover NOR 15 4822 410 12229 release knob 16 4822 214 13011 power module 17 4822 265 11548 connector 18 19 4822 360 10389 pump 20 4822 390 10156 shaving emulsion W EU 21 4822 442 01693 slide cover 22 4822 466 12153 foam plate 23 4822 138 10729 NiCd cell 4 5A A1 4822...

Отзывы: