j
REAR HPF/OFF/LPF
Select High-pass-filter (HPF), Low-pass-filter(LPF) or
•
OFF (flat) mode.
k
REAR FREQ
Adjust frequency of HPF or LPF from 30Hz to 400Hz.
•
l
REAR INPUT LEVEL
Adjust input level (0.3V to 6V).
•
m
REAR INPUT L/R
Connect car audio with RCA cable.
•
n
POWER (GND/REM/+12V)
C12V DC power cable, ground wire and remote
•
wire.
o
Fuse
p
SPEAKER OUTPUT
Connect to speakers.
•
2. Installation
Installation
You can mount the amplifier either under a seat or on the rear tray.
Note
To avoid interference, do not place the amplifier too
•
close to the car audio or antenna.
The supplied mounting screws are 14mm long. Make
•
sure that the mounting board is thicker than 14mm.
1
Place the unit on the location for installation.
2
Mark the positions of the four screw holes.
