About the protector indicator
The amplifier has a built-in protection circuit to protect the transistors
and speakers when:
The unit is overheated. Or
•
A DC current is generated. Or
•
The battery voltage is over low or
•
over high. Or
The speaker terminals are short circuited.
•
When the PROTECTOR indicator lights up in red, the unit
shuts down automatically. If this happens, please:
1
Take out the disc or tape and turn off the car audio.
2
Check the cause of the malfunction (see above).
3
If the amplifier has overheated, wait until the unit cools down
before use.
Replace fuse
If there is no power, the fuse may be damaged and need to be replaced.
1
Pull out the damaged fuse.
2
Replace the fuse with the supplied fuses or to buy two fuse
that matches the voltage of the damaged fuse (40A).
If the fuse gets damaged immediately after it has been replaced, there
may be an internal malfunction. In such case, consult your Philips dealer.
LINE OUT
Car audio unit
