background image

4

Any changes or modifications made to this 

device that are not expressly approved by 

Philips Consumer Lifestyle may void the user’s 

authority to operate the equipment.

  

2009 © Koninklijke Philips Electronics N.V.  

All rights reserved.

Specifications are subject to change without 

notice. Trademarks are the property of 

Koninklijke Philips Electronics N.V. or their 

respective owners. Philips reserves the right 

to change products at any time without being 

obliged to adjust earlier supplies accordingly.

1  Important

Safety

Read and understand all instructions 

• 

before you use the apparatus. If damage 

is caused by failure to follow instructions, 

the warranty does not apply.

This unit is designed for negative ground 

• 

(earth) 12 V DC operation only.

Use only the supplied mounting hardware 

• 

for a safe and secure installation.

Do not connect any active speakers (with 

• 

built-in amplifier) to the speaker terminals 

of the unit. Doing so may damage the 

active speakers.

To ensure safe driving, adjust the volume 

• 

to a safe and comfortable level.

To avoid short circuit, do not expose the 

• 

apparatus, remote control or remote 

control batteries to rain or water.

Never expose the apparatus to direct 

• 

sunlight, naked flames or heat.

Clean the apparatus with soft, damp 

• 

cloth. Never use substances such as 

alcohol, chemicals or household cleaners 

on the apparatus.

Notice

Environmental information

All unnecessary packaging has been omitted. 

We have tried to make the packaging easy to 

separate into three materials: cardboard (box), 

polystyrene foam (buffer) and polyethylene 

(bags, protective foam sheet.) 

Your system consists of materials which can 

be recycled and reused if disassembled by 

a specialized company. Please observe the 

local regulations regarding the disposal of 

packaging materials, exhausted batteries and 

old equipment.

  

EN

Содержание CMP400/55















Отзывы: