18
EN
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select DISC, FM, or USB as the alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold
TIME/
SLEEP
for more than two seconds.
»
"The hour digits are displayed and
begin to blink.
2
Press / (or
+/-
/) repeatedly to set the
hour, and then press
TIME/SLEEP
.
»
The minute digits are displayed and
begin to blink.
3
Repeat step 2 to select the source, and
adjust volume.
Note
•
If no button is pressed in 90 seconds, the unit exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
• In standby mode, press
TIME/SLEEP
repeatedly to activate or deactivate the
alarm.
»
If the timer is activated, is displayed.
Tip
•
If the disc/USB source is selected, but no disc is placed
or no USB connected, the unit switches to the tuner
source automatically.
Set the sleep timer
• To set the sleep timer, when the unit is
switched on, press
TIME/SLEEP
repeatedly
to select a set period of time (in minutes).
»
When the sleep timer is activated,
is displayed.
To deactivate sleep timer:
• When the unit is switched on, press
TIME/
SLEEP
repeatedly until
[SLP OFF]
(sleep
off) is displayed.
»
When the sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit with an 3.5mm audio cable (not supplied).
1
Make sure that the external audio device is
connected to this unit.
2
Press
AUX
to select the
AUX IN
source.
3
Start to play the external device (see the
user manual of the external device).
Содержание BTD5210
Страница 2: ......