15
2. Setting up the Display
•
Swap: The main picture source and
the sub picture source swapped on
the display.
Swap A and B source in [PIP] mode:
B
A
(main)
↔
B
(main)
A
•
Off: Stop MultiView function.
HDMI1 HDMI2
HDMI1
HDMI2
VGA
DisplayPort1
DisplayPort2
DisplayPort1 DisplayPort2
VGA
SUB SOURCE
SOURCE
Inputs
MAIN
POSSIBILITY (xl)
(xl)
Note
1. When you do the SWAP function, the
video and its audio source will swap at
the same time.
2.4 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the display face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. Loosen the assembly screws, then
detach the bases from the display.
Note
This display accepts a 200mm x
200mm
VESA-Compliant mounting interface.
200mm
200mm
