background image

27

9.Customer care and warranty

9.  Customer care and 

warranty

9.1  Philips’ Flat Panel Monitors 

Pixel Defect Policy

Philips strives to deliver the highest 
quality products. We use some 
of the industry's most advanced 
manufacturing processes and practice 
stringent quality control. However, 
pixel or sub pixel defects on the TFT 
Monitor panels used in flat panel 
monitors are sometimes unavoidable. 
No manufacturer can guarantee that 
all panels will be free from pixel 
defects, but Philips guarantees that 
any monitor with an unacceptable 
number of defects will be repaired 
or replaced under warranty. This 
notice explains the different types of 
pixel defects and defines acceptable 
defect levels for each type. In order to 
qualify for repair or replacement under 
warranty, the number of pixel defects 
on a TFT Monitor panel must exceed 
these acceptable levels. For example, 
no more than 0.0004% of the sub 
pixels on a monitor may be defective. 
Furthermore, Philips sets even higher 
quality standards for certain types or 
combinations of pixel defects that are 
more noticeable than others. This policy 
is valid worldwide.

subpixel

pixel

Pixels and Sub pixels 

A pixel, or picture element, is composed 
of three sub pixels in the primary colors 

of red, green and blue. Many pixels 
together form an image. When all sub 
pixels of a pixel are lit, the three colored 
sub pixels together appear as a single 
white pixel. When all are dark, the three 
colored sub pixels together appear as a 
single black pixel. Other combinations 
of lit and dark sub pixels appear as 
single pixels of other colors.

Types of Pixel Defects 

Pixel and sub pixel defects appear on 
the screen in different ways. There are 
two categories of pixel defects and 
several types of sub pixel defects within 
each category. 

Bright Dot Defects

Bright dot defects appear as pixels or 
sub pixels that are always lit or 'on'. That 
is, a bright dot is a sub-pixel that stands 
out on the screen when the monitor 
displays a dark pattern. There are the 
types of bright dot defects.

One lit red, green or blue sub pixel.

Two adjacent lit sub pixels:

-  Red + Blue = Purple
-   Red + Green = Yellow
-   Green + Blue = Cyan (Light Blue)

Содержание Brilliance 272P







































Отзывы: