11
EN
1
Press on a slave speaker.
»
The
indicator on the speaker flashes
blue, while that on the previous master
speaker turns off.
»
The
GROUP
indicators on both
speakers start flashing until the new
master speaker sets up connection
with its slaves.
»
The volume indicator on the speaker
turns white while that on the previous
master speaker turns green.
2
Pair and connect your Bluetooth-enabled
device with the new master speaker (see
'Connect a Bluetooth-enabled device' on
3
After successful Bluetooth connection, play
music on the Bluetooth device.
»
Music streams from your Bluetooth
device to the whole group of speakers.
Switch to single mode
A
Press
GROUP
on the master to enter
single mode.
»
The slaves keep looking for the master
until timeout in 15 minutes.
»
You can create a new group with the
slaves or press
GROUP
on a slave to
enter single mode.
• Press
GROUP
on the master again to
resume group mode.
B
Press
GROUP
on a slave to switch to
single mode.
»
The
GROUP
indicator on the speaker
turns off, and the indicator flashes
blue.
• Press
GROUP
again to rejoin a group.
»
The
GROUP
indicator lights up again
and the indicator turns off.
Control play
Note
•
Due to data buffering, you may experience some
delay when you play/pause or adjust volume from the
Bluetooth device.
Control from the speaker
•
In single mode, turn the
speaker on/off.
•
In group mode, turn the
whole group of speakers on/
off.
(unavailable
in AUDIO
IN mode)
•
In single mode, pause/resume
play of the current speaker.
•
In group mode, pause/
resume play of the whole
group.
Volume
knob
• Press to mute/unmute the
current speaker.
»
The volume indicator
flashes when the speaker
is muted.
• Turn clockwise/anticlockwise
to increase/decrease volume
of the current speaker.
Control from the connected Bluetooth device
You can use controls on your
Bluetooth device directly.
Downloaded from www.vandenborre.be
