Philips BDP3306, Руководство пользователя

Страница: 41 / 68

EN
EN - 41
• When the HDMI OUT jack is outputting the video in
1080p/24, picture will not be output from the VIDEO
OUT jack.
• When connected to an HDCP incompatible display
device, the picture will not be displayed properly.
• The audio signals from the HDMI OUT jack (including
the sampling frequency, the number of channels and bit
length) may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some
do not support audio output (for example, projectors).
While connected to a device such as a projector, audio
will not be output from the HDMI OUT jack.
• When this unit’s HDMI OUT jack is connected to a
DVI-D compatible display device(s) (HDCP compatible)
with an HDMI-DVI converter cable, the signals are
output in digital RGB.
• When you make a selection, the TV monitor
temporarily goes blank and then comes back again. If it
does not come back, press
[HDMI] repeatedly to
change the resolution or press and hold [
B
(play)]
on the front panel for 5 seconds to change the setting
back to its default.
12.3. Network Installation
Set up network connection settings in order to use
BD-Live™, Netflix / Film Fresh / Blockbuster / VUDU /
Pandora or network update function.
䡲 Connection Test
After you enable a network connection or change the
network settings, always perform the connection test to
check if the connection is correctly made.
1. Use
[
K
/
L
/
s
/
B
] to select “Setup” in the home
menu, then press [OK] .
2. Use [
K
/
L
] to select “Network Setup”, then press
[OK] .
3. Use [
K
/
L
] to select “Network Installation”, then
press [OK] .
4. Use [
K
/
L
] to select “Connection Test”, then press
[OK] .
• Connection test will start automatically and the test
result will appear right after the connection test
finishes.
- “Connecting...” : The test is in progress.
- “Pass” : Connection test is successfully completed.
- “Failed” : Connection test failed. Check the
connection settings.
5. Press [OK] to go back to the setup menu, or press
[ (home)] to exit.
Copyright protection system
To play back the digital video images of a BD-video or
DVD-video via an HDMI connection, it is necessary that
both the player and the display device (or an AV
receiver / amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology
that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please
read the operating instructions of your display device (or
an AV receiver / amplifier) for more information.
(home) A “Setup” A “Network Setup” A
“Network
Installation”