Philips basicPalette II, Руководство по установке и настройке

Страница: 62 / 88

Installation & Setup Guide
Palette II Lighting Control Console
5 4
Setup
ACCESSORY - HARDWARE COMPONENTS
1. Overview
The console is highly configurable and can be set up in different ways depending on your requirements.
The Hardware Setup window provides setup options. Components such as button array panels, Grandmasters,
triggers, and console lights can be configured by pressing the appropriate tab in the window.
To access the Hardware Setup window, select "Hardware Setup" from the main softkey menu. For more information
on setting up components, refer to "Hardware Setup" in the PaletteOS software
Help Menu .
Preset Scene Mode
Scene Mode allows you to operate the Palette II as a common 2-Scene console. This is achieved on a PresetPalette
only by selecting either the PRESET button for 2 scene operation or by pressing WIDE for single scene operation.
2. A/B C/D
The A/B and C/D faders have multiple purposes. On a new show file, the A/B faders are configured as disabled.
Note: Regardless of configuration of the A/B and C/D faders, the [SELECT], [HALT/BACK] and [GO] buttons will
function as normal on the appropriate cue list.
• Disabled - If you chose this option, the sliders will do nothing. If you are just doing a "GO SHOW," this is the saf-
est mode of operation as inadvertent moves on these faders will have no affect.
• PB Crossfader - In this mode, the left-hand fader is the overall intensity master of the cue list assigned
to this playback and the right-hand fader is, at will, a manual cross fader. The [GO] and [Halt/Back] buttons func-
Press tabs to bring up
configuration options for
hardware components