background image

ENGLISH

Intended use

 The Philips Avent Nipple Shield is intended 

to cover and protect the nipples of lactating women 
to support breastfeeding. The device is intended for 
a single user.

Indications for use

 The Philips Avent Nipple Shield is 

indicated for use when the mother has sore, sensitive, 
cracked nipples or suffers from nipple pain. It is also 
indicated to help the baby develop better latch-on 
behavior in case of oral anomalies or when the mother 
has flat/inverted nipples. Moreover, it can be used to 
alleviate milk supply difficulties when the baby is not 
transferring the milk well, has an uncommon sucking 
technique (i.e. weak sucking, small/preterm babies) or to 
help the baby in coping with milk flow.

Contraindications

 There are no contraindications.

Side effects

 When using the device, undesirable side effects 

that may occur are mastitis, cessation of breastfeeding, 
infant thrush and poor infant weight gain. If you or your 
baby experience any of these symptoms, contact a 
healthcare professional or breastfeeding specialist.

Important safety information

Read this important information carefully before you use 
the product and save it for future reference.

  

Warning to avoid choking and swallowing

 

-

Never leave the nipple shield and the hygiene case 
unattended and keep out of reach of children.

 

-

Inspect before each use. Throw away at the first signs 
of damage or weakness or after 2 months of usage.

   

Warning to avoid contamination and to ensure 

hygiene

 

-

Follow the instructions described in the Cleaning and 
Disinfection sections.

Recommendations

 

-

Use the product only in case of breastfeeding 
problems as described in the Indications For Use.

 

-

Recommended to be used with advice from health 
care professional. If problems or pain occur, consult 
your lactation consultant or physician.

 

-

An electronic copy of these instructions can be found 
at

 www.philips.com/support

.

Before usage

Step 1 - Cleaning 

   

Warning

Do not use abrasive cleaning agents or aggressive 
chemicals or substances when you clean the nipple 
shield. Clean the nipple shield and hygiene case before 
first use and immediately after each use.

Manual cleaning

1

   Rinse with drinking-quality water for 10-15 seconds. 

2

  Wash in warm, drinking-quality water (approx. 95 °F) 

with dishwashing liquid, preferably without artificial 
fragrances or coloring. 

3

  Rinse with drinking-quality water for 10-15 seconds. 

4

  Dry with a clean cloth or leave to dry on a clean surface.

Dishwasher cleaning

 

1

   Place on top rack of the dishwasher. 

2

  Run standard program with common household 

dishwasher detergent. 

3

  If not fully dry after dishwasher program, dry with a 

clean cloth or leave to dry on a clean surface.

Step 2 - Disinfection

   

Warning

Disinfect before first use and at least once a day.  
Clean before disinfection.
Be careful: After disinfection, the nipple shields may  
be very hot. The hygiene case and the water remaining  
in the case may still be hot. To prevent burns, only use 
after cooling down for 5 minutes.

   

Warnings to avoid contamination and to ensure 

hygiene

If you use the hygiene case for disinfection: 
- Clean the case before first use. 
-  Use the correct water level, microwave power and time. 

Not doing so can lead to reduced disinfection and can 
damage the case or nipple shields. 

- Only use the case provided.

Boiling

1

   Clean as described under ‚Cleaning‘. 

2

   Boil the nipple shields in drinking-quality water for  

5 minutes. 

3

   Leave to dry on a clean surface.

Microwave

 Alternatively, use only the hygiene case 

provided according to the instructions below. 

1

   Clean the hygiene case (as described under ‚Cleaning‘). 

2

  

Add 0.9 fl.oz. of drinking-quality water to the case, up 
to the indicated line (Fig. 1). 

3

  

Place the nipple shield(s) in the hygiene case and 
securely close the lid (Fig. 2). 

4

  

Place the filled hygiene case in the microwave for  
3 minutes at 750-1000 W (Fig. 3). 

5

  

Let the hygiene case cool down for 5 minutes (Fig.4).

6

  Drain water from the hygiene case (Fig.5). 

7

  

Dry the nipple shield(s) with a clean cloth or leave to 
dry on a clean surface.

Usage

   

Warning

Wash your hands and breasts thoroughly with soap and 
water before you touch the nipple shields to prevent 
contamination.

Applying the product

 Follow the instructions below 

when placing the device on your breast: 

1  

Remove the cleaned and disinfected nipple shield 
from the hygiene case. 

2

   Place drinking-quality water or breast milk on the 

skin-facing side of the brim to help the shield stick to 
your skin (Fig. 6). 

3  

Hold the shield at the base of the nipple area and 
press the nipple cavity partially inside out, so that it 
becomes half way inverted (Fig. 7). 

4  

Rotate the shield so that the baby can have nose and 
chin contact with your breast skin (Fig. 8). 

5  

Center the shield over your nipple and slightly stretch 
the wings of the shield as you stick the product onto 
your breast (Fig. 9). 

6  

With the shield applied, you can now breastfeed as 
normal.

Storing

 Store the clean nipple shield(s) in the hygiene 

case or in a dry, clean container. Storing the nipple 
shield(s) in an unclean or wet container could cause 
contamination.

Disposal

 According to local regulations.

Explanation of symbols

The warning signs and symbols are essential to ensure 
that you use this product safely and correctly and to 
protect you and others from injury. Below you find the 
meaning of the warning signs and symbols on the label 
and in the user manual.

This symbol indicates the hygiene case is 
microwave compatible.

This symbol indicates to fill the hygiene case 
with water.

This symbol indicates to wait 5 minutes before 
taking the hygiene case out of the microwave.

The 5 inside this symbol is the recycling code 
used to identify the material from which the 
hygiene case is made, which is polypropylene 
(PP), to facilitate recycling or other reprocessing.

Technical specifications

 

-

Product type: Two type nipple shield size:  
Small 15 mm (0.6 in.); Medium: 21 mm (0.8 in.)

 

-

Materials: Silicone (nipple shield); Polypropylene 
(hygiene case)

 

-

Service life: 2 months

750 – 1000W

3 min.

3

5

8

6

9

25 ml/

0.9 fl.oz

1

2

5 min.

4

7

SCF153

 Philips Consumer Lifestyle BV

Tussendiepen 4, 9206 AD Drachten, The Netherlands
www.philips.com/avent

Trademarks are the property of Koninklijke Philips N.V.
© 2019 Koninklijke Philips N.V.
All rights reserved.
3000.038.9758.1 (20/8/2019)

Nipple shield 

Protège-Mamelon

 

FSC

3000_038_9758_1_DFU-Leaflet_37.5x25_14p_MAX_v2.indd   1

05/09/2019   12:11

Отзывы: