Philips Avalon FM20, Инструкция по эксплуатации

Страница: 35 / 221

3 Basic Operation
35
Adjusting the Screen Brightness
1
Enter the Main Setup menu by selecting the SmartKey .
2
Select User Interface .
3 Select
Brightness
.
4
Select the appropriate setting for the screen brightness. 10 is the brightest, 1 is the least bright.
Optimum
is suitable for most situations.
Adjusting Touch Tone Volume
The touch tone volume is the tone you hear when you select any field on the monitor screen. To adjust
the touch tone volume,
1 Enter the
Main Setup
menu by selecting the SmartKey .
2 Select
User Interface
.
3
Select
Touch ToneVolume
, then select the appropriate setting for the touch tone volume: 10 is the
loudest and 1 is the quietest. Selecting zero switches the touch tone volume off.
Setting the Date and Time
1
Select the date and time screen element from the monitor's info line to enter the
Date, Time
menu.
2
Select, in turn, the
Year
,
Month
,
Day
,
Hour
(in 24 hour format) and
Minute
, as necessary
.
3
Select Store Date, Time to change the date and time.
If connected to a Philips OB TraceVue system, the monitor uses the OB TraceVue system date and
time, including daylight saving time changes.
WARNING
Changing the date and time while the monitor is connected to an OB TraceVue system can result in a
mismatch in the time and date between the monitor and the OB TraceVue system.
When disconnected from AC power, the monitor retains the date and time setting for at least two
months.
Checking Your Monitor Revision
1
Select Main Setup -> Revisions to open the Monitor Revision menu.
2
From the Monitor Revision menu, select the monitor component for which you need revision
information.
Preparing to Monitor
Confirm fetal life before you begin fetal monitoring. Familiarize yourself with the basic operation
principles before you start to monitor.