10
EN
Listen to an external device
With this clock radio, you can also listen to an
external audio device such as an MP3 player.
1
Connect an audio input cable with a 3.5
mm connector on both ends to
•
the
AUDIO IN
socket on this speaker,
and
•
the headphone socket on the external
device.
2
Press
SOURCE
repeatedly to select AUX
source.
3
Play audio on the external device (refer to
its user manual).
Set alarm timer
You can set two alarms to ring at different time.
Note
•
You can only set alarm in standby mode.
•
Make sure that you have set the clock correctly.
AUDIO IN
1
Press and hold
AL1
or
AL2
for two
seconds to activate alarm setting mode.
»
The hour digits blink.
2
Press
HR
repeatedly to set the hour.
3
Press
MIN
repeatedly to set the minute.
4
Press
AL1
or
AL2
to confirm.
5
Press
HR
or
MIN
to set the alarm source:
Buzzer or FM tuner.
6
Press
AL1
or
AL2
to confirm.
Tip
•
The clock radio exits alarm setting mode when being
idle for 10 seconds.
Activate or deactivate the alarm timer
1
Press
AL1
or
AL2
to view alarm settings.
2
Press
AL1
or
AL2
again to activate or
deactivate the alarm timer.
»
If the alarm timer is activated,
[AL1]
or
[AL2]
is displayed.
»
If the alarm timer is deactivated, the
alarm indicator disappears.
•
To stop the ringing alarm, press the
corresponding
AL1
/
AL2
.
»
The alarm repeats ringing for the next
day.
Note
•
If FM tuner is selected and you are listening to radio
when alarm time comes, buzzer is activated automatically.
•
When alarm sounds, volume increases gradually. You
cannot adjust the alarm volume manually.
Alarm source
Alarm
duration
AC power
FM tuner or
buzzer
30 minutes
Battery
power
Buzzer
1 minute
Содержание AJT3300
Страница 2: ......
