3
To disconnect the set from the mains supply completely,
remove the plug from the wall socket.
Note
•
The type plate is located on the bottom of the set.
Clock memory backup
The clock memory backup allows your alarm and clock time settings
to be stored for up to a day when there is a power interruption e.g.
mains failure. The complete clock radio and display illumination will
be switched off. As soon as the mains supply returns, the display will
indicate the correct time.
1
Remove the battery door to insert a 9 volt 6F22 type battery
(not included) for backup.
2
Replace the battery door.
Note
•
If no backup battery is installed or the power interruption is
prolonged, you will need to set the clock and alarm times again.
•
Batteries contain chemical substances so should be disposed of
properly.
Radio
You can use this set solely as a radio!
1
Adjust
OFF • RADIO • AUX
to
RADIO
to switch on the radio.
2
Select your waveband by adjusting the
BAND
switch.