Philips AC4084, Руководство пользователя

Страница: 7 / 104

7 EN
English
3
Remove all the filters from the appliance.
4
Remove all packaging material from the
filters.
5
Put the filters back into the appliance.
4
3
6
Slide the Multi-care filter (if available) into
the pre-filter.
3 Get started
Install filters
The appliance comes with all filters fitted
inside. Remove the packaging of the filters
before you can use the appliance. Remove all
filters, unpack them, and place them back into
the appliance described as follows:
Tip
•
When you remove or insert filters, place the
appliance against a wall for more stability.
Note
•
Insert the filters in the correct position.
•
Make sure that you place the filters in the order of
HEPA filter, activated carbon filter, Multi-care filter,
and finally the pre-filter.
•
The Multi-care filter is sold separately from AC4084.
•
Make sure that the side with the tag is pointing
towards you.
1
Place your fingers in the recesses of the
side panels.
2
Gently pull the top part of the front panel
out, then lift the top part of the front
panel towards you.
4
2
1
EN