Replacing the Razor Heads
◗
Replace the razor heads once a year for
optimal shaving results.
◗
Replace damaged or worn razor heads with
model HQ56 Philips Norelco razor heads
only.
Storage
◗
Be sure razor is turned off. Remove cord
from outlet and razor before storing in a safe,
dry location where it will not be crushed,
banged, or subject to damage.
◗
Do not wrap power cord around razor when
storing.
◗
Store cord in a safe location where it will not
be cut or damaged.
◗
Do not place or store razor where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
C
◗
Put the Protective Cap on razor to protect
heads.
Assistance
◗
For assistance, visit our website:
www.philips.com/support
or call toll free 1-800-243-3050
◗
Online information is available 24 hours a day,
7 days a week.
18
ENGLISH
19
19
ENGLISH
Battery Removal
C
◗
This Philips Norelco razor contains a
rechargeable Nickel Metal Hydride battery
which must be disposed of properly.
◗
Battery should only be removed when
razor is to be discarded.
◗
For assistance, visit our website,
www.philips.com/support or call toll free:
1-800-243-3050.
1
Turn razor ON.
2
Allow razor to run until the battery is
empty/depleted.
3
Turn razor OFF.
4
Use a screwdriver to remove the screws
in the back of the razor and open it.
5
Cut the battery strips with a cutter and
pull the battery loose from the glued strip.
Be careful, the battery strips are very sharp.
6
Remove the rechargeable battery.
7
Do not attempt to replace battery.
Insulate battery ends by covering with tape
and/or place battery in a small plastic bag.
8
Discard your razor. Do not attempt to
plug power cord into the outlet or
recharge the razor after the battery has
been removed.
