Philips 6401 SERIES, Руководство пользователя

Страница: 84 / 133

reception.
7 - You can also change the frequency
yourself. Select the frequency number one by one
and use the

(up) or

(down) keys to change
the value. Select Search and press OK to test the
reception again.
8 - Press

(left) repeatedly if necessary, to close
the menu.
Manual Installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually…
1 - Press

, select All Settings and press OK .
2 - Select Channels > Antenna/Cable
Installation and press OK . Enter your PIN code if
necessary.
3 - Select Analogue: Manual Installation and
press OK .
• System
To set up the TV system, select System .
Select your country or the part of the world where
you are now and press
OK .
• Search Channel
To find a channel, select Search Channel and
press OK . You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press

(right) to select Search and press OK to
search for a channel automatically. The found
channel is shown on screen and if the reception is
poor, press
Search again. If you want to store the
channel, select Done and press OK .
• Store
You can store the channel on the current channel
number or as a new channel number.
Select
Store Current Channel or Store as New
Channel and press OK . The new channel number is
shown briefly.
You can redo these steps until you have found all
available analogue TV channels.
84