Philips 48OLED806, Руководство пользователя

Страница: 80 / 98

25
Software
25.1
Update Software
Update from Internet
If the TV is connected to the Internet, you may receive
a message to update the TV software. You need a
high-speed (broadband) Internet connection. If you
receive this message, we recommend you to carry out
the update.
With the message on screen, select Update and
follow the instructions on-screen.
You can also look for a software update yourself.
During the software update, there is no picture and
the TV will switch off and on again. This might happen
several times. The update can take a few minutes.
Wait until the TV picture comes back up. Do not press
the power switch
 on the TV or on the remote
control during the software update.
To look for a software update yourself…
1 - Select  Settings > Update Software > Search
for Updates and press OK .
2 - Select Internet (recommended) and press OK .
3 - The TV will look for an update on the Internet.
4 - If an update is available, you can update the
software right away.
5 - A software update can take several minutes. Do
not press the  key on the TV or remote control.
6 - When the update is done, the TV will return to the
channel you were watching.
Update from USB
It might be necessary to update the TV software.
You need a computer with an high-speed Internet
connection and a USB flash drive to upload the
software on the TV. Use a USB flash drive with at least
2Gb free space. Make sure that write protection is
switched off.
To update the TV software…
1 - Select  Settings > Update Software > Search
for Updates and press OK .
2 - Select USB and press OK .
Identify the TV
1 - Insert the USB flash drive into one of the USB
connections of the TV.
2 - Select Write to USB and press OK . An
identification file is written on the USB flash drive.
Download the software
1 - Insert the USB flash drive into your computer.
2 - On the USB flash drive, locate the
file update.htm and double click it.
3 - Click Send ID .
4 - If new software is available, download the .zip
file.
5 - After the download, unzip the file and copy the
file autorun.upg onto the USB flash drive. Do not
place this file in a folder.
Update the TV software
1 - Insert the USB flash drive into the TV again. The
update starts automatically.
2 - A software update can take several minutes. Do
not press the  key on the TV or remote control. Do
not remove the USB flash drive.
3 - When the update is done, the TV will return to the
channel you were watching.
If a power cut occurs during the update, never
remove the USB flash drive from the TV. When the
power returns, the update will continue.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB flash drive.
Look for OAD Updates
Scan to search for an OAD (Over-the-air Download)
software update.
To look for OAD updates…
1 - Select  Settings > Update Software > Search
for Updates > Look for OAD updates .
2 - Follow the instructions on screen.
* Note: The OAD software update is only available in
selected countries.
25.2
Software Version
To view the current TV software version…
1 - Select  Settings > Update Software > Current
Software info , and press OK .
2 - The version, release notes and creation date are
shown. Also, the Netflix ESN Number is shown if
available.
3 - Press  (left) repeatedly if necessary, to close
the menu.
80