background image

3

EN

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with a dry cloth.

7. 

Do not block any of the ventilation openings. Install in accordance with  

 

the manufacturer’s instructions.

8. 

Do not install near any heat sources such as radiators, heat registers, 

 

stoves, or other apparatus (including amplifiers) that produce heat.

9. 

Do not defeat the safety purpose of the polarized or grounding-type plug. 

 

 

A polarized plug has two blades with one wider than the other. A 

 

grounding type plug has two blades and third grounding prong. The wide 

 

blade or third prong are provided for your safety. When the provided 

 

plug does not fit into your outlet, consult an electrician for replacement 

 

of the obsolete outlet.

10. 

Protect the power cord from being walked on or pinched particularly at 

 

plugs, convenience receptacles, and the point where they exit from the 

 apparatus.

11. 

Only use attachments/accessories specified by the manufacturer.

12. 

            Use only with a cart, stand, tripod, bracket, or table specified by 

                  the manufacturer, or sold with the apparatus. When a cart is 
                  used, use caution when moving the cart/apparatus combination 
      to avoid injury from tip-over.

13. 

Unplug this apparatus during lightning storms or when unused for long 

 

periods of time.

14. 

Refer all servicing to qualified service personnel. Servicing is required 

 

when the apparatus has been damaged in any way, such as power-supply 

 

cord or plug is damaged, liquid has been spilled or objects have fallen 

 

into apparatus, the apparatus has been exposed to rain or moisture, 

 

does not operate normally, or has been dropped.

15. 

This product may contain lead or mercury. Disposal of these materials 

 

may be regulated due to environmental considerations. For disposal or 

 

recycling information, please contact your local authorities or the 

 

Electronic Industries Alliance: www.eiae.org.

16. Damage Requiring Service -

 The appliance should be serviced by 

  

 

qualified service personnel when:

A.

  The power supply cord or the plug has been damaged; or

 

B.

  Objects have fallen, or liquid has been spilled into the appliance; or

C.

  The appliance has been exposed to rain; or

D.

  The appliance does not appear to operate normally or exhibits a 

      marked change in performance; or 

E.

  The appliance has been dropped, or the enclosure damaged.

  

17. Tilt/Stability -

 All televisions must comply with recommended 

  

 

international global safety standards for tilt and stability properties of its 

 cabinets 

design.

• Do not compromise these design standards by applying excessive pull 

force to the front, or top, of the cabinet which could ultimately 
overturn the product.

 • Also, do not endanger yourself, or children, by placing electronic 

equipment/toys on the top of the cabinet. Such items could 
unsuspectingly fall from the top of the set and cause product damage 
and/or personal injury.

18. Wall or Ceiling Mounting -

 The appliance should be mounted to a 

 

wall or ceiling only as recommended by the manufacturer.

19. Power Lines -

 An outdoor antenna should be located away from 

 

 power 

lines.

20. Outdoor Antenna Grounding -

 If an outside antenna is connected to 

  

 

the receiver, be sure the antenna system is grounded so as to provide 

 

some protection against voltage surges and built up static charges.

 

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, 

 

provides information with respect to proper grounding of the mats and 

 

supporting structure grounding of the lead-in wire to an antenna

 

discharge unit, size of grounding connectors, location of antenna

 

discharge unit, connection to grounding electrodes and requirements for 

 

the grounding electrode. See Figure below.

21. Objects and Liquid Entry -

 Care should be taken so that objects do 

 

 

not fall and liquids are not spilled into the enclosure through openings.

 a) Warning: To reduce the risk of fire or electric shock, this apparatus

should not be exposed to rain or moisture and objects filled with  
liquids, such as vases should not be placed on this apparatus.

22. Battery Usage CAUTION -

 

To prevent battery leakage that may  

 

 

result in bodily injury, property damage, or damage to the unit:

 • Install all batteries correctly, with + and - alignment as marked on the 

unit.

 

• Do not mix batteries (old and new or carbon and alkaline, etc.)

 

• Remove batteries when the unit is not used for a long time.

this reminder is provided to call the CATV system installer’s attention to Article 820-40 of 

the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the 
grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE (NEC)

Note to the CATV system installer: 

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT 

NEC SECTION

 810-20)

(

GROUNDING CONDUCTORS 
(

NEC SECTION 

810-21)

 

GROUND CLAMPS

POWER SERVICE GROUNDING 
ELECTRODE SYSTEM
(

NEC ART

 250, 

PART H

ELECTRIC SERVICE EQUIPMENT

Содержание 46HFL3683S













Отзывы: