Philips 43PUS7363 страница 19 Скачать руководство пользователя

Страница: 19 / 90

Channel Packages

Satellite operators can offer channel packages that
bundle free channels (free-to-air) and offer a sorting
that suits a country. Some satellites offer subscription
packages - a collection of channels you pay for.

If you choose a subscription package, the TV might
ask you to select a Quick or Full installation.
Select

Quick

to install the channels of the package

only or select

Full

to install the package and all

other available channels too. We recommend a Quick
installation for subscription packages. If you have
additional satellites that are not part of your
subscription package, we recommend a Full
installation. All installed channels are put in the
channels list All.

Unicable Setup

The Unicable System

You can use a Single Cable system, MDU or Unicable
system to connect the antenna dish to the TV. A
Single Cable system uses one cable to connect the
satellite dish to all satellite tuners in its system. A
Single Cable system is typically used in apartment
buildings. If you use a Unicable system, the TV will ask
you to assign a user band number and corresponding
frequency during the installation. You can install 1 or 2
satellites with Unicable on this TV.

If you notice some missing channels after a Unicable
installation, another installation might have been
done at the same moment on the Unicable system.
Do the installation again to install the missing
channels.

User Band Number

In a Unicable system, each connected satellite tuner
must be numbered (e.g. 0, 1, 2 or 3 etc.).

You can find the available user bands and their
number on the Unicable switchbox. User band is
sometimes shortened as UB. There are Unicable
switchboxes that offer 4 or 8 user bands. If you select
Unicable in the settings, the TV will ask you to assign
the unique user band number for each built-in
satellite tuners. A satellite tuner cannot have the same
user band number as another satellite tuner in the
Unicable system.

User Band Frequency

Next to the unique user band number, the built-in
satellite receiver needs the frequency of the selected
user band number. These frequencies are mostly
shown next to the user band number on a Unicable
switchbox.

Manual Channel Update

You can always start an channel update yourself.

To start a channel update manually…

1 -

Press



, select

All Settings

and press

2 -

Select

Channels

Satellite Installation

and

press

3 -

Select

Search for Channels

and press

4 -

Select

Update Channels

and press

. The TV

will start updating. The update may take a few
minutes.

5 -

Follow the instructions on screen. The update

may take a few minutes.

6 -

Select

Finish

and press

OK.

Add a Satellite

You can add an additional satellite to your current
satellite installation. The installed satellites and their
channels remain untouched. Some satellite operators
do not allow adding a satellite.

The additional satellite should be seen as an extra, it
is not your main satellite subscription or not the main
satellite of which you use its channel package.
Typically, you would add a 4th satellite when you
have 3 satellites already installed. If you have 4
satellites installed, you might consider removing one
first to be able to add a new satellite.

Setup

If you currently have only 1 or 2 satellites installed, the
current installation settings might not allow adding an
extra satellite. If you need to change the installation
settings, you must redo the complete satellite
installation. You cannot use

Add satellite

if a change

of settings is needed.

To add a satellite…

1 -

Press



, select

All Settings

and press

2 -

Select