EN 8
on the remote control or
key on the TV.
Switch the TV to standby if it is on.
Press
on the remote control.The
“Standby” indicator is turned on.
Switch off the TV.
Press the on-off key of the TV to the OFF
state shown in the figure.The “standby”
indicator is turned off.
Tip
Though the TV consumes very little
power when in standby mode, energy
continues to be consumed. Disconnect
the TV power cable from the power
outlet when the TV is not used for an
extended period of time.
Watch content on connected
devices
Note
Switch on the device before selecting it as
an external source.
Use the Source button
1. Press
SOURCES
key.The source list
appears.
2. Press ▲/▼ key to select a device.
3. Press
OK
key.The TV switches to the
selected device.
Switch channels
Switch channels without Using Channel list:
Press
CH+/CH-
key on the TV or channel
+/-
key on the remote control.
Enter a channel number using the numeric
buttons on the remote control.
Press the
(BACK) key on the remote
control to return to the previous channel.
Switch channels Using Channel list:
You can use the channel list to watch all available
channels.
1. Press
OK
key.The channel list appears.
2. Press ▲/▼ key to select a channel.
3. Press
OK
key to watch the selected
channel.
4. Press the
(BACK) key to switch to the
previously watched channel.
