4 Guided Setup
With the preliminaries out of the way, it’s time to turn on your TV. As
the TV starts for the first time, it leads you through Guided Setup, which
configures the TV before you start to use it.
–
During Guided Setup, you’ll:
–
Answer a few questions
–
Provide network connection information
–
Get a software update
–
Link your TV to your Roku account.
–
Connect devices such as a DVD player, game console, or cable
box.
Starting Guided Setup
To start Guided Setup, press the
9
button on the remote to turn on
your TV.
Note(s)
●
Guided Setup normally runs only once, the first time you turn on your TV. If
you need to run Guided Setup again, you’ll have to perform a factory reset,
as explained in
.
When you first turn on your TV, it will take a few seconds to get itself
ready. You’ll notice the following things happening:
1
The status indicator blinks every time the TV is busy doing
something; in this case it’s powering up and getting ready for you.
2
The power-on screen appears and the status indicator blinks
slowly for a few more seconds. The power-on screen shows a
brand logo while the TV starts up.
3
After a few seconds, Guided Setup starts.
Completing Guided Setup
Follow these steps to complete Guided Setup. At this point, you
should be seeing the
Language
screen.
1
Only on models that have a Roku voice remote: A few moments
after the
Let’s get started screen appears
, Guided Setup starts
the pairing process for the voice remote. (You’ll know if you have
this type of remote because it will have microphone or search
button just below the down arrow on the purple pad.) If the voice
remote does not pair automatically, follow the instructions on the
screen to complete the pairing process.
Tip(s)
●
On TVs sold in the United States, if you are blind or visually
impaired, you can activate Audio Guide, a text-to-speech screen
reader to help you navigate the TV’s menus and commands. To
enable the Audio Guide, press the
A
button on the remote four
times in rapid succession. Repeat to disable Audio Guide. (The
A
button is located directly below the directional pad on the right
side of the Roku remote.)
Note(s)
●
If you enabled Audio Guide, choosing any language other than English
disables it.
2
Press the
Down
arrow on the remote to highlight your preferred
language, and then press
OK
or the
Right
arrow.
3
Some models have a country selection screen: If you don’t see
this screen, skip ahead to the next step. If you see this screen,
select your country.
Note(s)
●
If you enabled Audio Guide, choosing any country other than United States
disables it.
4
Press
OK
or the
Right
arrow on the remote to go to the next
screen:
Note(s)
●
Some models show the title
First things first
instead of
Set up
environment.
16
.
English
