Philips 42PFL5603S/60, Руководство пользователя

Страница: 35 / 59

EN-33
EN
GLISH
Press 2.
Æ
to enter the list.
Press 3.
Î
or
ï
to select your time zone.
Press 4.
Í
to return to the Installation
menu.
Step 4 Install channels
Your TV searches and stores all available digital
and analogue TV channels as well as all available
digital radio channels.
In the 1. Installation menu, press
ï
to select
Channel installation .
Press 2.
Æ
to enter the Channel
installation menu. Automatic
installation is highlighted.
Press 3.
Æ
to select Start now .
Press 4. OK .
Press the green key to start. 5.
The installation may take a few minutes.
When the channel search is completed,
6.
press the red key to return to the
Installation menu.
Press
7. MENU to exit.
Tip
E
When digital TV channels are found, the
list of installed channels may display empty
channel numbers. If you want to rename,
reorder or uninstall stored channels, see
Section 6.5 Rearrange channels .
6�2 Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
D
Skip to Step 2 Search and store new TV
channels if your system settings are correct.
Press 1. MENU on the remote control
and select TV menu > Installation
> Channel installation > Analogue:
Manual installation .
Channel install... Analogue: Manual...
System
Search
Fine tune
Store current ch...
Store as new ch... Automatic install...
Installation update
Digital: Test recept...
Analogue: Manual...
Rearrange
Press 2.
Æ
to enter the Channel
installation menu. System is highlighted.
Press 3.
Æ
to enter the System list.
Press 4.
Î
or
ï
to select your country or
region.
Press
5.
Í
to return to the Channel
installation menu.
Step 2 Search and store new TV channels
Press 1. MENU on the remote control
and select TV menu > Installation
> Channel installation > Analogue:
Manual installation > Search .
Press 2.
Æ
to enter the Search menu.
Press the red key and use the number keys 3.
on the remote control to manually enter
the three digit frequency. Alternatively, press
the green key to automatically search for
the next channel.
Press
4.
Í
when the new channel is found.
Select 5. Store as new channel to store the
new channel under a new channel number.
Press
6.
Æ
to enter.
Press 7. OK . Done appears.
Press 8. MENU to exit.