Philips 42PF1000/62, Руководство по обслуживанию, Страница: 8 / 55

Mechanical Instructions EN 8 TES1.1E PA 4.
4.6 IR & LED Board Removal
1. Remove the large plastic rear cover, as described earlier.
2. De-solder wires [1], or unplug the connector on the other
end of the wire from the main board.
3. Remove fixation screws [2].
4. Remove the IR & LED board.
Figure 4-7 IR & LED board removal
4.7 Main Board Removal
1. Remove the small rear covers, as described earlier.
2. Remove the large plastic cover, as described earlier.
3. Unplug connectors [1].
4. Carefully unplug the fragile LVDS connector [2].
5. Remove fixation screws [3].
6. Remove the main board.
Figure 4-8 Main board removal 1/2
Figure 4-9 Main board removal 2/2
4.8 Switch Board Removal
1. Remove the small rear covers, as described earlier.
2. Remove the large plastic cover, as described earlier.
3. Unplug connectors [1].
4. Pull the mains switch [2] as far as possible out of the frame.
5. Remove fixation screws [3] and [4].
6. Remove the switch board.
Figure 4-10 Switch board removal 1/2
Figure 4-11 Switch board removal 2/2
G_16520_0 3 9.ep s
1 3 1206
1
2
G_16520_0 3 5.ep s
1 3 1206
3
3
3
3
1
2
G_16520_036.eps
131206
1
G_16520_029.ep s
121206
2
1
3
3
3
3
3
G_16520_0 3 2.ep s
1 3 1206
4