Philips 40PFK6550, Руководство пользователя

Страница: 91 / 146

DVB-T or DVB-C
DVB Settings
Network Frequency Mode
If you intend to use the fast Quick Scan method
in Frequency Scan to search for channels,
select Automatic . The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable operator in your country.
If you received a specific network frequency value to
search for channels, select
Manual .
Network Frequency
With the Network Frequency Mode set to Manual ,
you can enter the network frequency value received
from your cable operator here. To enter the value, use
the number keys.
Frequency Scan
Select the method of searching for channels. You can
select the faster
Quick Scan method and use the
predefined settings used by most cable operator in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended
Full Scan method. This method will take
more time to search for and install channels.
Frequency Step Size
The TV searches for channels in steps of 8MHz .
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of
1MHz . Using the 1MHz steps will take more
time to search for and install channels.
Digital Channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
Analogue Channels
If you know your cable operator is not offering
analogue channels, you can skip searching for
analogue channels.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select
Free +
Scrambled . If you did not subscribe to pay TV
channels or services, you can select Free
Channels Only .
For more information, in Help , press the colour
key

Keywords and look up CAM, Conditional
Access Module .
Reception Quality
You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel…
1 - Tune to the channel.
2 - Press

, select All Settings and press OK .
3 - Select Channels > Antenna/Cable
Installation and press OK . Enter your PIN code if
necessary.
4 - Select Digital: Reception Test and press OK .
5 - Select Search and press OK . The digital
frequency is shown for this channel.
6 - Select Search again and press OK to check the
signal quality of this frequency. The test result is
shown on screen. You can reposition the antenna or
check the connections to possibly improve the
reception.
7 - You can also change the frequency
yourself. Select the frequency number one by one
and use the

(up) or

(down) keys to change
the value. Select Search and press OK to test the
reception again.
8 - Press

(left) repeatedly if necessary, to close
the menu.
Manual Installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually…
1 - Press

, select All Settings and press OK .
2 - Select Channels > Antenna/Cable
Installation and press OK . Enter your PIN code if
necessary.
3 - Select Analogue: Manual Installation and
press OK .
• System
To set up the TV system, select System .
Select your country or the part of the world where
you are now and press
OK .
91