Philips 32PHG5301, Руководство пользователя

Страница: 31 / 67

11
Timers and clock
11.1
Sleeptimer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1 - Press

and select Setup and press OK .
2 - Select TV settings > General settings > Sleep
timer .
With the slider bar you can set the time to up to 180
minutes in 5 minute increments. If set to
0 min , the
sleep timer is turned off. You can always turn off your
TV earlier or reset the time during the countdown.
3 - Press

, repeatedly if necessary, to close the
menu.
11.2
Clock
To know what time it is, press

TV GUIDE to find
the time in the TV guide.
Change the clock mode
You can change clock mode to automatic or manual.
By default, it is set to automatic mode, which
automatically synchronizes it to Coordinated
Universal Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
Manual .
1 - While you watch TV, press

.
2 - Select Setup > TV settings > General settings .
3 - Select Clock > Auto clock mode .
4 - Select Automatic or Manual , then press OK .
Change the time zone
In countries with clock transmission data, you can
change the time zone if
Auto clock mode >
Automatic is selected.
1 - In the Clock menu, select Time zone .
2 - Select your time zone, then press OK .
Set the clock manually
You can set the date and time manually. Before you
start, set the clock mode to
Manual .
1 - In the Clock menu, select Date or Time , then
press OK .
2 - Set the time or date with the Navigation buttons.
3 - Select Done , then press OK .
When you record programs with Smart TV,
Recording , we recommend not to change the time
and date manually.
11.3
Switch off timer
If you do not press a key on the remote control after a
preset time, or if the TV receives no input signal or
remote control commands for 10 minutes, the TV
turns off automatically to save energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, you should deactivate
the automatic switch off.
To deactivate the Switch off timer . . .
1 - Press

and select Setup and press OK .
2 - Select TV settings > General settings > Switch off
timer and set the slider bar to Off .
3 - Press

, repeatedly if necessary, to close the
menu.
For more information on environmentally friendly TV
settings, press

Keywords and look up Eco
settings .
31