When the
Location
is set to
Shop
, you can set the
availablility of a specific demo for in store use.
Reset TV Settings and Reinstall TV
Reset all settings value to original TV settings
(Home)
>
Settings
>
General
settings
>
Factory settings
Redo full TV installation , and set TV status back to
the first time you switch on
(Home)
>
Settings
>
General
settings
>
Reinstall TV
Enter PIN code and select
Yes
, the TV will reinstall
completely. All settings will be reset and installed
channels will be replaced. The installation can take a
few minute
Region and Language Settings
Languages
Change the language of the TV menu and
messages
(Home)
>
Settings
>
Region and
language
>
Languages
>
Menu language
Clock
(Home)
>
Settings
>
Region and
language
>
Clock
Correct clock automatically
(Home)
>
Settings
>
Region and
language
>
Clock
>
Auto clock mode
- The standard time setting for the TV clock
is
Automatic
. The time information comes from the
broadcasted UTC - Coordinated Universal Time
information.
- If the clock is not correct, you can set the TV clock
to
Manual
.
Correct clock manually
(Home)
>
Settings
>
Region and
language
>
Clock
>
Auto clock mode
>
Manual
(Home)
>
Settings
>
Region and
language
>
Clock
>
Date, Time
Go to previous menu, and select
Date
and
Time
to
adjust the value.
Note
:
- If none of the automatic settings display the time
correctly, you can set the time manually.
Set time zone
(Home)
>
Settings
>
Region and
language
>
Clock
>
Time zone
Select one of the time zones.
Set the TV to switch to Standby automatically after a
preset time
(Home)
>
Settings
>
Region and
language
>
Clock
>
Sleep timer
Set the TV to switch to Standby automatically after a
preset time. With the slider bar you can set the time
to up to 180 minutes in increments of 5 minutes. If set
to 0 minutes, the sleep timer is switched off. You can
always switch off your TV earlier or reset the time
during the countdown.
Universal Access Settings
(Home)
>
Settings
>
Universal access
With
Universal Access
switched on, the TV is
prepared for use for the blind or partially sighted
people.
Switch on universal access settings
(Home)
>
Settings
>
Universal
access
>
Universal access
>
On
.
Universal access for blind or partially sighted
people
(Home)
>
Settings
>
Universal access
>
Audio
description
>
Audio description
>
On
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
(Home)
>
Settings
>
Universal access
>
Audio
description
>
Audio description
>
Mixed volume
,
Audio effects
,
Speech
- Select
Mixed volume
, you can mix the volume of
the normal audio with the audio commentary. Press
the arrows
(up) or
(down) to adjust the value.
- Set
Audio effects
to
On
for extra audio effects in
29
