Philips 32PFL7406H, Руководство пользователя

Страница: 43 / 72

EN 43
En
gl
is
h
To switch on hearing impaired audio and
subtitles
1. While you watch TV, press
OPTIONS
.
2. Press one of the following buttons to
select an option:

Red
: Switch hearing impaired on or off.

Green : Switch on hearing impaired
audio and subtitles.
3. Press to exit.
Visually impaired
Tip: To verify whether visually impaired
audio is available, press
OPTIONS
and
select [Audio language] . Languages with an
eye icon support visually impaired audio.
To switch on visually impaired audio (if
available)
1. While you watch TV, press OPTIONS .
2. Press the green button to select [Visually
impaired]
.
3. Press one of the following buttons to
select an option:

Red
-
[Off]
: Turn off visually impaired
audio.

Yellow
-
[Headphones]
: Hear visually
impaired audio from headphones only.
(if applicable)

Green - [Speakers] : Hear visually
impaired audio from speakers only.

Blue
-
[Sp headphones]
: Hear
visually impaired audio from speakers
and headphones.
4. Press to exit.
Note: If the EasyLink remote control is
enabled, you cannot select the green or
yellow buttons. To disable, see
Use more of
your TV > Use EasyLink > Switch on (Page
36 ).
Adjust volume for the visually impaired
1. In the
[Universal access]
menu, press the
yellow button to select
[Mixed volume]
.
2. Press the
Navigation buttons
to move the
slider up or down, then press
OK
.
3. Press to exit.
Audio feedback for the visually impaired
This feature enables audio feedback when
buttons are pressed on the remote control
or TV.
1. In the
[Universal access] menu, press the
blue button to select [Key beep] .
2. Press the green button to turn on audio
feedback, or press the red button to turn it
off.
3. Press to exit.
Other settings
TV demo
Start a demo to find out more about your
TV's features.
Note: Demos are not supported on MHEG
channels.
1. While you watch TV, press .
2. Select [Setup] > [Watch demos] , then
press OK .
3. Select a demo, then press
OK
.
4. Press to exit.
Update software
TV software
Check software version
1. Press .
2. Select [Setup] > [Software settings] >
[Current software info]
, then press
OK
.
The version of the current software is
displayed.
Caution:
Do not install a lower version of
software than the current version installed
on your product. TP Vision cannot be held
liable or be made responsible for problems
caused by a software downgrade.
Update the software through one of these
options:

update with USB flash drive

update from digital broadcast

update from the Internet