EN 38
Audio settings
Select audio language
If the TV channel has multiple or dual sound
broadcast, you can select the preferred
audio language.
While you watch TV, press
OPTIONS
.
[Audio language]
: Select the audio
language for digital channels.
[Dual I-II]
: Select the audio language for
analogue channels.
Digital TV channels can stream several audio
languages. If multiple languages are available,
select the preferred language.
1. Press .
2. Select
[Setup]
>
[Channel settings]
or
[Satellite settings]
>
[Language]
.
3. Select one of the following settings, then
press
OK
:
[Primary audio]
/
[Secondary audio]
:
Select the available audio language.
Set a secondary language in the same
menu. If the primary language is
unavailable, the TV receives this
language.
[Preferred audio format]
: Select to
receive standard audio format (MPEG)
or advanced audio formats (AAC, EAC-
3 or AC-3 if available).
[Mono/Stereo]
: Select mono or stereo
audio if stereo broadcasting is available.
4. Press
EXIT
to exit.
Reset to factory settings
You can restore default picture and sound
settings, while the channel installation settings
remain the same.
1. While you watch TV, press .
2. Select
[Setup]
>
[TV settings]
>
[Factory
settings]
, then press
OK
.
TV settings are reset to default.
Channels
Reorder and rename
Reorder channels
After the channels are installed, you can
reorder the channel list to your preference.
1. While you watch TV, press
FIND
. The
channel list is displayed.
2. Select the channel to reorder and press
OPTIONS
.
3. Select
[Reorder]
, then press
OK
.
4. Press the
Navigation buttons
to move the
highlighted channel to another location, then
press
OK
.
5. Select one of the following options, then
press
OK
.
[Insert]
: Insert the channel into the
desired location.
[Swap]
: Swap location with another
channel.
6. Once complete, press
OPTIONS
and
select
[Exit]
.
Rename channels
After the channels are installed, you can
rename them to your preference.
1. While you watch TV, press
FIND
. The
channel list is displayed.
2. Select the channel to rename and press
OPTIONS
.
3. Select
[Rename]
, then press
OK
.
4. In the entry screen, press the
Navigation
buttons
or
Numeric buttons
to edit the
name, then press
OK
.
Tip
: You can press
OK
in the entry screen
to enable the
Onscreen Keyboard
.
6. Once complete, press the
Navigation
buttons
to select
[Done]
.
To clear the entry, select
[Clear]
.
To cancel, select
[Cancel]
.
7. Press
OK
to confirm.
8. Press
EXIT
to exit.
