Alignments
6.
6.6
Total Overview SAM modes
Table 6-17 SAM mode overview
Main Menu
Sub-menu 1
Sub-menu 2
Sub-menu 3
Description
Hardware Info
A. SW version
e.g. “Q5551_0.9.1.0
Display TV & Stand-by SW version and CTN serial
number
B. Stand-by processor version e.g. “STDBY_83.84.0.0”
C. Production code
e.g. “see type plate”
Operation hours
Displays the accumulated total of operation hours.TV
switched “on/off” & every 0.5 hours is increase one
Errors
Displayed the most recent errors
Reset error buffer
Clears all content in the error buffer
Alignment
White point
Colour temperature
Normal
3 different modes of colour temperature can be
selected
Warn
Cool
White point red
LCD White Point Alignment. For values,
see Table
6-3 White tone default setting 32"
to
6-15 White tone default setting 55"
White point green
White point blue
Ambilight
Select module
Brightness
Select matrix
Dealer options
Virgin mode
Off/On
Select Virgin mode On/Off. TV starts up / does not
start up (once) with a language selection menu after
the mains switch is turned “on” for the first time (virgin
mode)
E-sticker
Off/On
Select E-sticker On/Off (USP’s on-screen)
Auto store mode
None
PDC/VPS
TXT page
PDC/VPS/TXT
Option numbers
Group 1
e.g. “00008.00001.15421.02239”
The first line (group 1) indicates hardware options 1
to 4
Group 2
e.g. “44816.34311.33024.00000”
The second line (group 2) indicates software options
5 to 8
Store
Store after changing
Initialise NVM
N.A.
Store
Select Store in the SAM root menu after making any
changes
Operation hours display
0003
In case the display must be swapped for repair, you
can reset the “”Display operation hours” to “0”. So,
this one does keeps up the lifetime of the display
itself (mainly to compensate the degeneration
behaviour)
Software maintenance
Software events
Display
Display information is for development purposes
Clear
Test reboot
Test cold reboot
Test application crash
Hardware events
Display
Display information is for development purposes
Clear
Test setting
Digital info
Current frequency: 538
QAM modulation: 64-qam
Display information is for development purposes
Symbol rate:
Original network ID: 12871
Network ID: 12871
Transport stream ID: 2
Service ID: 3
Hierarchical modulation: 0
Selected video PID: 35
Selected main audio PID: 99
Selected 2nd audio PID: 8191
Install start frequency
000
Install start frequency from “0” MHz
Install end frequency
999
Install end frequency as “999” MHz
Default install frequency
Installation
Digital only
Select Digital only or D Analogue before
installation
D Analogue