Philips 32PFL4766/F8, Руководство пользователя

Страница: 120 / 147

106
•
Check connection
– Select your existing network connection type, and then
press
OK
to start checking the network connection. The TV uses your current
network information to reconfirm the wireless or wired network connection to
the local network and the Internet connection.
•
Set up connection – Select a network connection type, and then select the
option to set up a new connection. Follow the on-screen instructions to
complete the network connection. For help with each of the steps, see
Network
connection .
•
Bandwidth saver – Enable or disable this feature as appropriate. If On , your TV
prompts you to stop streaming if you haven’t used the remote control within
the past four hours. If you do not respond, streaming stops to save your data
allocation and increase the network bandwidth available to other devices in
your home. Change to
Off
to disable the automatic bandwidth saving feature.
Note :
Some networks, such as those found in dorm rooms, hotels, and other public
places, may require you to read and agree to terms, enter a code, or provide
identifying information before letting you connect to the Internet. For more
information, see
Using your TV in a hotel or dorm room .
Postal code
Your TV needs to know your postal code so that it can display the correct channels
and program guide information. It attempts to determine your location by using
information from your Internet connection; however, the information available from
this source is not always accurate. To ensure you have the most accurate program
guide information, use the
Postal code
option to enter your correct code.
To set your correct postal code, from the Home screen menu, navigate to
Settings >
System > Postal code , and then pressing RIGHT . Use the on-purple directional pad to
enter your postal code in the on-screen keypad, and then select OK .