Philips 26HFL4372D/10, Руководство пользователя

Страница: 20 / 52

18 EN
Note
• If the sleep timer is off, the wallpaper is
displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleeptimer.
For more information on the sleeptimer, see
Use more of your TV > Use timers and locks >
Sleeptimer (Page 24).
Set a picture as Scenea
Note
•
The file size of the picture must not be
more than 1 MB.
1.
Connect the USB storage device to the
TV.
2.
Press .
3.
Select [Browse USB] , then press OK .
4.
Select a picture, then press .
5.
Select
[Set as Scenea]
, then press
OK
.
6.
Select [Yes] , then press OK .
7.
Press any key to exit Scenea.
Universal access
Enable universal access
Where supported by your digital TV
broadcaster, this TV allows special audio and
subtitles for the hearing impaired, as well
as special audio for the visually impaired.
To enable these features, you must turn on
universal access in the
[Preferences]
menu.
1.
Press .
2.
Select [Setup] > [TV settings] >
[Preferences]
>
[Universal access]
>
[On] , then press OK .
• [Stop] : Stops playback.
•
[Repeat]
: Repeats a video.
• [Shuffle on] / [Shuffle off] : Enables or
disables random play of videos.
Listen to digital radio
If digital broadcasting is available, digital radio
channels are installed automatically during
installation.
1.
While watching TV, press
a
.
2.
Select
[Channel list:]
, then press
OK
.
3.
In the channel list, press .
4.
Select [Select list] > [Radio] , then press
OK
.
5.
Select a radio channel, then press
OK
.
You can listen to satellite radio broadcast (if
available).
1.
While watching TV, press
a
.
2.
Select [Channel list] , then press OK .
3.
In the channel list, press .
4.
Select
[TV/Radio]
>
[Radio]
, then press
OK .
Use Scenea
Activate Scenea
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to [Home] mode.
1.
Press .
2.
Select
[Scenea]
, then press
OK
. The
default or pre-loaded picture is displayed.