Philips 240P4QPYEB/00, Руководство по обслуживанию

Страница: 88 / 104

!
88 Meridian 3
DP CABLE
The input signals are applied to the display through DP cable.
Length : 1.8 M +/- 50 mm
Connector type : DP male with DDC-2B pin assignments
White connector thumb-operated
jackscrews
With transplant pin protective
cover.
Pin Assignment:
PIN No. SIGNAL
1 ML_Lane 3(n)
2 Ground
3 ML_Lane
3(p)
4 ML_Lane 2(n)
5 Ground
6 ML_Lane
2(p)
7 ML_Lane 1(n)
8 Ground
9 ML_Lane
1(p)
10 ML_Lane 0(n)
11 Ground
12 ML_Lane 0(p)
13 Ground
14 Ground
15 AUX_CH
(P)
16 Ground
17 AUX_CH (N)
18 Hot Plug Detect
19 Return DP_PWR
20 DP_PWR
Timing requirement
Factory Preset mode definition:
1. Perfect FOS while presenting those timings.
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over scaler or
Panel spec.)
2. It needs to reserve the 10 timings space in memory size.
Mode storing capacity
Factory preset modes : Refer to Timing table
preset modes : Refer to Timing table
User modes : Refer to Timing table
Timing pixel clock over H/W limitation do not support.
Factory preset modes :
1. Factory modes and preset modes are defined in the enclosed timing table file
Attachment files: Refer to Timing table