Philips 22HFL3350D, Руководство по установке

Страница: 25 / 30

EN-23
EN
Clone configuration 8
8�1 From Cloning to TV
Copy TV configuration data from a USB stick
to TV.
Insert the USB stick to the USB connector 1.
at the side of the TV.
Enter
2.
Setup menu.
Press 3.
ï
to select Cloning to TV.
Press 4.
Æ
to enter Cloning to TV.
Press 5.
Æ
to load data to the TV.
During this process, the cloning files.
Setup menu Cloning to TV
Clock
Auto scart
USB break-in
Monitor out
Blank current Channel
Store - go right
Cloning to TV
TV to Cloning
Load
Done
Note
D
• During the process of copying, do not
remove the USB stick.
• All remote control command and
control buttons on the TV are disabled.
Switch off and then on to reset the TV
6.
after cloning.
From TV to Cloning 8�2
Copy TV configuration data from TV to USB
stick.
Enter 1. Setup menu.
Press 2.
ï
to select TV to Cloning.
Press 3.
Æ
to enter TV to Cloning.
Press 4.
Æ
to load data to the USB stick.
Setup menu TV to Cloning
Clock
Auto scart
USB break-in
Monitor out
Blank current Channel
Store - go right
Cloning to TV
TV to Cloning
Load
Done
Note
D
• During the process of copying, do not
remove the USB stick.
• All remote control command and
control buttons on the TV are disabled.
Switch off and then on to reset the TV
5.
after cloning.