
Meridian 3
87
Source / timing change: 10/s (typ.)
Note 2: Measurement power saving.
ŮŦŢŴŶųŦŮŦůŵġŰŧġ
űŰŸŦųġŴŢŷŪůŨįűťŧ
őŰŸŦųġŤŰůŴŶŮűŵŪŰůġ
ŮŦŢŴŶųŦġŵũŦġŸŢźġĮıĺı
3.9 VGA Display Identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.10 DVI Display Identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and
EDID V1.3
3.11 DDC /CI Support and Smart Manage /Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with, Philips
SmartManage, SmartControl V6.1, and Portrait Display Tune at least
3.12 Hot-key definition
ŅĻŝņŏňŝŮŰůŪŵŰųġ
űųŰūŦŤŵŴŝŴűŦŤŝʼnĹŝũŰŵġŬ
3.13 Smart Image
ŔŮŢųŵŊŮŢŨŦġőųŰŧŪŭŦġ
ŅŦŧŪůŪŵŪŰůŴĩŎijĪįťŰŤ
3.14 PerfectTune II (
formerly FGA, FACTORY GAMMA Alignment
)
A. PerfectTune must be done after warming 30 minutes at least.
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scaler embedded patterns.
D. Delta E < 2.5
3.15 Audio
3.15.1 Frequency
Response
The amplifier and speaker combination shall provide a frequency response of 300Hz to 20 KHz, with
+/-3db variation over the entire response range.
3.15.2 Total Harmonic Distortion
Total harmonic distortion shall be limited to 5% THD at the maximum wattage speaker rating specified
in section 1.3 at 1 KHz, when the input is 1.0Vrms.
3.15.3 Power
Handling
Each speaker transducer shall accept up to the specified wattage of audio power without damage or
exceeding the frequency response and total harmonic distortion specifications.