Philips 2100 Series, Руководство пользователя

Страница: 30 / 56

There is not enough coffee in my
cup. There is no water in the
internal circuit. Air may be present in the internal circuit.
Rinse the internal circuit of the machine
by turning the control dial to the hot
water icon and letting some hot water
flow out of the machine.
The cup volume has
been changed. Set with the memo function the cup
volume.
The brew group is dirty. Clean the brew group (see chapter
‘Cleaning and maintenance’, section
‘Cleaning the brew group’).
The milk does not froth. The automatic milk
frother is dirty or not
assembled or installed
correctly. Clean the automatic milk frother and
make sure it is correctly assembled or
installed.
The type of milk used is
not suitable for frothing. Different types of milk result in different
amounts of froth and different froth
qualities. Semi-skimmed or full-fat cow's
milk give good results.
Recycling
- This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
- Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Guarantee and support
If you need information or support, please visit www.saeco.com/support or
read the separate guarantee leaflet.
If you need information or support, please contact the Philips Saeco hotline
in your country. Contacts are included in the warranty booklet supplied
separately or visit www.saeco.com/support.
Ordering maintenance products
- water filter (CA6702)
- Lubricant (HD5061)
- Descaling solution (CA6700)
29
English