Philips 202P70 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 142

Philips 202P70 Скачать руководство пользователя страница 73

Regulatory Information

Please note that this device has been approved for non-business purposes and may be used in any
environment, including residential areas.

RETURN TO TOP OF THE PAGE

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All
equipment that works together (computer, monitor, printer, and so on) should have the same power supply
source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in
the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket,
which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of
standards PN-93/T-42107 and PN-89/E-06251.

file:///D|/EDFU/crt_19_6/edoc/english/202P/SAFETY/regs/regulat.htm (11 of 16)2005-08-10 ¤U¤È 01:05:34

«
...
71
72
73
74
75
...
»

Содержание 202P70















































































































































Отзывы:

Нет отзывов