Philips 190S5CB/00, Руководство по обслуживанию

Страница: 12 / 63

12 190S5 LCD
Mechanical Instructions
Go to cover page
Front View
Back View
Step1. Remove the base as shown in Fig. 3-4
-Remove the hinge cover
-Remove the six screws
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Step2. Remove the Front Bezel
-Remove the one screw as shown in Fig.5
-Use the thin " " screw driver to open the clicks as shown
in Fig.5-6.
Fig.6
Fig.7
Step3.Remove the BacK cover
- Remove the three clicks as shown in Fig.7 ,then remove the Control
board
-Use the thin " " type screw driver to open the clicks as shown in Fig.8
Fig.8
Step4. Remove the Matel frame board
- Remove the ten screws as shown in Fig.9
- Disconnect D-SUB hexagonal screws as shown in Fig.9
- Remove the matel frame board as shown in Fig.10
Fig.10
Fig.9
http://www.wjel.net