Philips 150B5CB/27, Руководство по обслуживанию

Страница: 9 / 65

9
Factory mode
Access Factory Mode
Step 2 :
[Push AUTO " " & OK " " buttons at the same time and hold
it ] + [Press power " " button untill comes out "Windows screen"
] => then release all buttons.
How to Get into Factory Mode Menu
Turn off monitor.
Press OK " " button, bring up Factory mode indication as
shown in Fig 2.
Step 1 :
Step 3 :
Front control panel
Fig. 2
Contrast adjustment (Sub-Contrast). Use this menu item to
adjust the contrast gain of pre-amp ranges from 0 to 255.
9 3 0 0 K R G B
6 5 0 0 K R G B
Color temperature gain adjustment. Use these menu items
to adjust the RGB gains of pre-amp for different color
temperatures, ranges from 0 to 255.
OFFSET R G B
Sub-Brightness adjustment. Use this menu item to adjust
the brightness level (DC-level) of pre-amp range from 0 to
255.(R/G/B ANALOG DC -level).
GAIN R G B
R/G/B GAIN adjustment. Use this menu item to adjust
the R/G/B (GAIN) of Amp. range from 0 to 255.(R/G/B
ANALOG GAIN Values).
(PS: The Offset R G B function can be used on reduce or eliminate
snowy noise on the background when the resolution of video signal is
1024 X 768 vertical 60Hz. Slightly increase or decrease the value
until snowy noise completely disappear.)
-
SUB CON: SUB CON:
HUDSON 150S5 T031 2003-12-12
<------ Factory mode indicator
Factory menu
Cursor can move on gray color area
Fig. 3
Fig. 1
150S5
Go to cover page
Hudson 150S5 V203 20030418
SUB - BRI :
SUB - CON : 100 130 160
9300K R Xxx G xxx B xxx
6500K R Xxx G xxx B xxx
SRGB R Xxx G xxx B xxx B 255 C 128
OFFSET2 R Xxx G xxx B xxx
GAIN R Xxx G xxx B xxx M 255 m 200
AUTO-SUB OK! OSDTIMER 60
IDX : 7
OFFSET1 R Xxx G xxx B xxx
SCALER:ADD: WRITE
PANEL: LG
1024x768 48.3KHz @60Hz
SUB-BRI : Brightness value range(Min Max)
SUB-CON :Contrast value range(Min Mid Max)
SRGB-B : Brightness of sRGB
SRGB-C : Contrast of sRGB
Gain-m :Minimum value of User Gain
Gain-M :Maximum value of User Gain
AUTO-SUB :To do Auto color function when push Menu
Key in white pattern
OSDTIMER :OSD time out control(sec)
IDX :Limit current of inverter (CPT: 28)(LG: 7)
Panel Type :PLS reference section 4
SCALER :Read/Write scaler register
Panel :CPT (CPT panel)
LG (LG.Philips panel)
http://www.wjel.net