Philips 107P2 CM25 GSIII Скачать руководство пользователя страница 3

Страница: 3 / 81

76 107P2 CM 25 GSIII

Go to cover page

Forward

Back

LightFrame for Windows

™

Introduction

Definitions

Compatibility

Language Selection

Installation

Philips LightFrame feature enriches the experience of pictures and

video on a Philips CRT (picture tube) monitor. This highlighting is done

by boosting the brightness and sharpness on a selected region of the

monitor screen. Since high brightness and sharpness are not preferred

for most standard Windows applications, this special feature will only be

active in certain circumstances. So that you can control these

circumstances, a special program and icons will be installed in your

Windows operating systems.

Philips LightFrame will only work with monitors that have been built to

use this software. Earlier Philips monitors or other manufacturers’

monitors will not work with this special software. It is recommended that

you install this software only on a Philips monitor designed to use it.

These monitors can be identified by the LightFrame™ logo on the front

of the monitor.
This software is not designed for use with LCD flat screen monitors.
LightFrame will work with true Windows-based programs and DOS-

based programs that operate in a Window’s environment. It will not work

with DOS-based programs operating only in a DOS environment.

The following list contains definitions for frequently used words.

Highlighted window: The selected window on which LightFrame is

active.

Highlighted area:

The selected rectangle (area) on which

LightFrame™ is active.

This version of LightFrame™ is compatible with

Windows 95

Windows 98

Windows NT

Windows 2000 Professional Edition.

While English is the default language of LightFrame™, the User

Interface can be set up to operate in Dutch, French, German, Italian,

Portuguese, or Spanish.

1) To install LightFrame™, place the CD in the CD-ROM drive.
2) Next, when the menu of items on the CD appears on your screen,

click on 'Install LightFrame '.

3) Now, follow the on-screen prompts to properly install the program.

The software checks to see if you have a compatible monitor. You

must say yes to the license agreement for the software to install.

4) After installation, LightFrame automatically loads and the icon

appears in the taskbar.

LightFrame is installed in the Start menu, under Programs. Unless

otherwise selected during installation, LightFrame is installed in

“C:\Program Files\Philips\LightFrame.” A shortcut is installed in the

StartUp folder and on the desktop. (If needed, LightFrame can be

operated manually from the StartUp folder.)
If LightFrame detects that your monitor is not LightFrame

compatible, an message appears on the monitor screen. See Error

Message number 1 under the heading Error Messages. If you see this

message, you can select to abort or continue the installation. However,

if you continue the installation, LightFrame will probably not work on

the monitor.

™

Notes

Uninstall

Operating LightFrame

Icon and Colors

How To Activate LightFrame

How to Deactivate LightFrame

Should you need to remove the LightFrame software, please follow

these steps.
1) First, click on the Start Menu.
2) Next, highlight Settings.
3) Then, click on Control Panel.
4) Now, click on Add/Remove Programs
5) Finally, select LightFrame from the list and then click on the

Add/Remove button.

After installation, LightFrame starts up automatically whenever the

computer is started. At system start up, LightFrame checks the

selected resolution of the monitor and if the monitor is LightFrame

capable.

An icon of a monitor represents LightFrame on your desktop. This icon

appears as a shortcut on the Windows desktop. LightFrame has three

(3) modes of operation: Active, Inactive, and Suspended. The same icon

with a different color in its center represents each mode.

Active = The LightFrame icon has bright green center.

Inactive = The icon has a gray center.

Suspended = The icon has a yellow center with a red cross.

An active window must be 100% visible, i.e. it must be on top of all other

windows or areas. If any part of another window or area overlaps a

highlighted window, LightFrame automatically suspends operation.

That means the icon goes from a green center to a yellow on with a red

cross and the feature ceases. Once that window or area is removed and

the original highlighted window is on top again, LightFrame

automatically re-engages and the icon regains its bright green center.
An active window must also be 100% on the monitor’s viewing area. If

part of a highlighted window moves off the monitor’s viewing area,

LightFrame automatically goes into the Suspended mode. If part of a

window is off the viewing area, you will not be able to use LightFrame

on that window.
Only one window or area at a time can be highlighted.

1) Click on the LightFrame icon in the systemtray (the area to the far

right in the taskbar). . The icon will turn from gray to a green center.

2) Guide the mouse to the window you want displayed. As you move the

mouse, the cursor changes to a small arrow with a light bulb.

3a) Click on the window you want to have highlighted. The brightness

and sharpness are automatically adjusted.

3b) If you want to highlight only an area of a window, click on the left

mouse button and drag the cursor over the area to be highlighted

while holding the mouse button. A rectangle forms around the area.

When the area is encompassed by the rectangle, release the mouse

button and the area becomes highlighted.

To deactivate, click on the LightFrame icon in the System Tray of the

Taskbar. The light in the middle of the icon turns gray and LightFrame

is deactivated.

If a highlighted window is closed before LightFrame is deactivated,

LightFrame is automatically deactivated.

™

Notes

Note

Содержание 107P2 CM25 GSIII


















































































Результаты поиска

Содержание 107P2 CM25 GSIII

Отзывы:

Похожие инструкции для 107P2 CM25 GSIII

Бренды по названию

Популярные бренды

Philips 107P2 CM25 GSIII, Руководство по обслуживанию

Результаты поиска

Содержание 107P2 CM25 GSIII

Отзывы:

Похожие инструкции для 107P2 CM25 GSIII

Бренды по названию

Популярные бренды