Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
18
AVENT Naturally Shaped Nipple
After sanitizing all parts, insert the
nipple into the screw ring and attach
the dome cap over the top of the
nipple. Screw on the sealing base.
Dome cap (p)
Screw ring (r)
Nipple (q)
Sealing base (s)
d
e
g
h
p
q
r
r
s
s
t
Keeping Parts Clean and Compact for Travel
Pump
After sanitizing all parts insert the white valve and fit the
diaphragm onto the pump body. Clip the funnel cover over
the Let-down Massage Cushion and screw the sealing base
onto the bottom of the pump body.Then put the assembled
items in the gray drawstring bag.
Sealing base (s)
Pump body (d)
Let-down Massage Cushion (g)
Funnel cover (h) (also used as a stand when pumping)
Breast Milk Container
After sanitizing all parts, click the
sealing disc into the screw ring
and twist onto the container.
Screw ring (r)
Sealing disc (t)
Milk container (e)
Before you begin pumping, make sure you have washed, sanitized and carefully assembled
the Manual Breast Pump. Consult the ‘Preparing to Pump’ on page 7 for tips about
stimulating let-down and milk flow.
17
2
Initiate let-down: Squeeze the handle with shallow,
quick strokes, until milk starts to flow. Do not use
full compression on the handle.
3
Begin Pumping: When you see milk beginning to
flow, you can establish a comfortable pumping rhythm
and level of suction. Create a natural breastfeeding
rhythm by holding down on the handle for 3 seconds,
then releasing, and repeating that pattern for
each compression.
Note:You do not need to compress the handle fully, only until it
feels comfortable. The further you compress the handle, the more
suction the pump will provide.
4
After milk is collected, unscrew the pump body
from the base.
Caution: Do not continue pumping for more than 5 minutes
at a time if no result is achieved.Try expressing at another
time during the day.
1
Wash your hands thoroughly and make sure your
breasts are clean.
Form a Seal: Press the pump against your breast,
so that your nipple fits into the funnel. A seal should
form between the pump and your breast.
Using the Manual Breast Pump
