k
P O W E R D I S T R I B U T I O N P A N E L S S E R I E S 2 0 0
Wire cross section:
of the connection of the position lights: 2,5 mm² (normal bulbs), min.1mm²
for LED-navigation lights.
Bowlantern:
If you`re using a twocolour - bowlantern, you have to connect it to outlet A1
and the jumper has to remain (delivery status).
If there are two separate position lights (port/starboard), you have to remove
the jumper J1.
Needed switches:
Voltmeter-switch-over: 1-0-2
Ord.no. 5 1808 1103
Tanksensor-switch-over: 1-2
Ord.no. 5 1803 1102
Illumination switch: 0-1
Ord.no. 5 1801 1102
Batt.-main switch FBH: (1)-0-(2)
Ord.no. 5 1808 1302
Bilge Auto-Man.switch: 1-0-2
Ord.no. 5 1808 1103
Bowlantern Port
Bowlantern Stb
Stern light
Anchor light
Tricolour light
Steaming light
Minus
J 1
Connection of the control switches
Connection of the position light monitor POS6E
Page 5