Philco TeraDRY 12, Инструкция по эксплуатации

Страница: 34 / 36

CH
High temperature protection,
the environmental
temperature
＞
38 ℃
DECOMMISSIONING
STORAGE
Long-term storage - If you will not be using the unit for an extended period of time (more
than a few weeks) it is best to clean the unit and dry it out completely. Please store the unit
per the following steps:
8.
Press power button to switch off and unplug the unit.
9.
Drain the remaining water from the unit.
10.
Clean the filter and let the filter dry completely in a shaded area.
11.
Collect the power cord at the water tank.
12.
Re-install the filter at its position.
13.
The unit must be kept in upright position when in storage.
14.
Preserving the machine in ventilating, dry, non- corrosive gas and safe place indoor.
ATTENTION:
The evaporator inside the machine has to be dried out before the unit is packed to avoid
component damage and molds. Unplug the unit and place it in a dry open area for days to dry it
out. Another way to dry the unit is to set the humidity point more than 5% higher than the
ambient humidity to force the fan to dry the evaporator for a couple of hours.
DISPOSAL
WARNING!!!
Releasing refrigerant into atmosphere is strictly forbidden!
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact your local government for information regarding the
collection systems available. If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being