Philco TeraDRY 12, Инструкция по эксплуатации

Страница: 31 / 36

4. Please be sure to clean the condensed water in the water tank before resetting the working
mode of the machine.
5. If the water tank is dirty, rinse it with clean water. Avoid using detergents, steel balls, chemical
dust removers, diesel oil, benzene, diluents or other solvents. Otherwise, the water tank will be
damaged and leak
6. Replace the empty tank back into the unit. Otherwise, the water full indicator may remain red
and the machine cannot restart.
CONTINUOUS DRAINING
For continuous operation or unattended dehumidification, please
connect the attached drain hose to the unit. Condensate water can
be automatically flow into a bucket or drain by gravity.
1.Straighten the drainage pipe
2.Insert one end of the drain into the drain into the cistern hole
and connect the other end to the bathroom, outdoor or bucket like
container, or the prescribed drainage area.
Warning
4. Please do not block the drain or drain pipe, if the phenomenon of blocking, condensed water
will flow into the water tank.
5. Please do not bend the drain pipe. The height of the drain pipe should be lower than the outlet.
6. The drain pipe shall be securely connected to the outlet;
MAINTENANCE
Note: before cleaning and maintaining the machine, be sure to turn off the machine and pull the
power plug to prevent electric shock.