Philco TeraDRY 12, Инструкция по эксплуатации

Страница: 28 / 36

After switching on the power, all the indicators and the screen will be on for 1 second and then off.
After a buzzer, the power indicator will be on and the machine will be in standby mode.
Press this button, the machine starts to run, the machine initial humidity is 60%RH, default
automatic mode and high wind operation.
Press this key again, the machine will stop running, and the fan will be closed.
Auto mode - continuously drying mode-sleeping mode cycle, press once to switch the mode from
one to another, the corresponding indicator lights up.
● Auto mode : when environmental humidity ≥ set hu3%, the fan starts working and
compressor starts working after 3 seconds.
When environmental hu midity ≤ set humidity -3%, the compressor stops working and and the fan
delay shutdown.
Both fan speed and humidity can be adjusted under auto mode.
● Continuously drying mode : The machine continues to run, but the humidity cannot be
adjusted.
● Sleeping mode : Touch the sleep button, the button lights up and start the sleep function.
After no operation in 10 seconds, all indicators turns dark gradually and the wind speed is
automatically switched from high to low. Touch any button to wake up the indicator. Touch sleep
button again to exit the sleep mode.
In sleep mode, the fault code is not displayed, the wind
speed is not adjustable, and the humidity is adjustable.
In automatic mode or sleep mode, you can operate this key to adjust the set humidity: every time
you press the set humidity increase by 5%, according to the cycle of 30%-80%.
Long press this key to query the current room temperature, double eight lights display the current
room temperature 5 seconds after the automatic return to display the current humidity. If this key
is pressed for a long time, it will be display the ambient temperature.