Philco PTB 91 FW, Руководство пользователя, Страница: 14 / 156

Copyright © 2019, Fast ČR, a. s. Revision 09/2021
EN - 12
• Position the appliance away from sources of heat such as stoves, radiators, direct sunlight etc.
• Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for the
class of unit concerned, as specified on the rating plate.
Sufficient air must be allowed to circulate in the lower rear section of appliances, as poor air circulation can
affect performance.
Climate class Ambient temperature
N +16°C to +32°C
ST +16°Cto+38°C
T +16°C to +43°C
• Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section
of the appliance, as poor air circulation can affect performance. Built-in appliances should be positioned
away from heat sources such as heaters and direct sunlight.
Installing the rubber supportingpad
• If there is a rubber supporting pad and a screw provided in a plastic bag with your appliance, you can
install these accessories according to the following procedure.
• Note:
There is no need to install these accessories under normal usage.
Only under the extreme circumstances, cabinet empty while load on door with total mass of 10 kg and
opening the door about 90 degree .this refrigerator may take risk of tipping. Then rubber supporting pad
should be fastened to the lower base cover to steady this appliance.
1. Tilt appliance to find screw hole on the left of lower base cover.
lover base cover
2. Put screw into the hole of rubber supporting pad.
screw
rubber supporting pad