Philco PH235IC, Инструкция по эксплуатации / Руководство по установке

Страница: 10 / 24

10
If the display flashes alternately with the heat setting
This means that:
1. You have not placed a pan on the correct cooking zone or,
2. Pan is using is not suitable for induction cooking or,
3. Pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.The
display will automatically turn off after 1 minutes if no suitable pan is placed on
it.
N
Induction Hob Using your
To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show“ – “, indicating that the induction hob has entered
the state of standby mode.
2. Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed, select a relevant zone select key
by pressing key (A) . The symbol 0. selected will stay fully it.
control.
• If you do not choose a heat setting within 1 minute, the Induction hob will automatically
switch off. You will need to start again at step 1.
4. Adjust heat setting by touching the regulating key(D)
• You can modify the heat setting at any time during cooking.