Philco PDL25, Руководство пользователя

Страница: 22 / 24

10
will work in the High speed;
②
, when the it is defrosting under “Dry” mode then the fan
motor will work in the Turbo speed.
③
, when the water tank full alarm is on during
defrosting, then the compressor will start to work for 30 minutes;
④
, during such 30
minutes, if NTC detects that the tube’s temperature is
≥
0
℃
and last for 2 minutes, then
the defrost is cancelled; if the tube’s temperature is
≤
-1
℃
during this 2 minutes, then
the defrost will be started again after the 30 minutes’ working of compressor.).
（
7
）
Compressor protection function
This device is equipped with compressor protection function—once the dehumidifier is
off, the compressor will delay 3 minutes to start when being turned on immediately.
（
8
）
Refrigerant leakage detection function
The compressor will detect the temperature of the sensor and the temperature on the tube
every 8 minutes; once the detected result being that the difference between these two
temperature rates is up to 3
℃
in the latest 5 times, then it means refrigerant leakage.
The compressor and fan motor will stop working, and the LED display will show “C8”.
No reaction or sound when you touch any button at this situation. User has to unplug the
dehumidifier and then plug it on again. (Note: the compressor will not detect when it is
not working.)
（
9
）
Continuous Drainage
When continuous drainage is need, please connect the included 15mm diameter tube to
the continuous drainage hole. The dehumidifier will keep working and water will go out
directly via the pipe. Then it won’t stop by the water full situation.
Please put the tube evenly on the ground when continuous drainage. Any folded or
uneven situation will be possible to stop the drainage.