Philco PCF 142 F JOKER, Руководство пользователя

Страница: 14 / 122

Copyright © 2019, Fast ČR, a. s. Revision 01/2022
EN - 12
2.4 Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service
agent or similar qualified person.
2.5 Start to use
• Before connecting the power supply during the first start-up, the freezer must remain in the place
intended for the use of the product for 2 hours.
• The freezer shall run 2 to 3 hours before loading fresh or frozen foods; the freezer shall run for more than 4
hours in summer in advance considering that the ambient temperature is high.
2.6 Energy saving tips
• The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces
the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts
down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.